|
The Ergo Erector™ simlified box erecting, improves package quality, accelerates the box building process and reduces adhesive consumption by as much as 50%.
Operator easily square boxes by sliding them over the mandrel, fold in the minor flaps, apply the hot melt to the minor flaps, compress the major flaps against the mandrel and seal the case bottom permanently. The mandrel system insures that the minor flaps do not deflect away from the major flaps when compressed and the maximum bond is achieved immediately
The complete Ergo Erector™ system includes steel workstation base, adjustable height mandrel, mandrel specific to your box or boxes, high volume hot melt tank, hose and gun, welded steel hot melt tank stand, adjustable boom, hose cradle and tool balancer.
Assembly is very easy typically taking one hour.
Specs:
| 1 |
200 lb. 48" x 48" 5/16" Steel Workstation Base with floor mounting holes for three mandrel positions, boom base and tank stand |
| 1 |
Mandrel with vertical post adjustment height from 29" to 47" |
| 1 |
Boom and Tank Stand |
| 1 |
8' 8" tall vertical post with 38" horizontal boom |
| 1 |
Slide in horizontal portion of boom |
| 1 |
Adjustable tool balancer |
| 1 |
Hot Melt hose cradle |
| 1 |
Industrial Hot melt Tank, 10 lb capacity, 120 or 240 VAC |
| 1 |
8' Heated Flexible hose |
| 1 |
Top Feed Hot melt handgun with ball swivel connector |
| 1 |
.055" orifice nozzle tip |
| 1 |
50 lbs. GIA1041 fast setting hot melt adhesive |
Delivery is 2-3 weeks |
