|
Product
Details:
Was $1459.00 Now $ 1015.00
(1 Available / Demo / 1 month warranty)
|
|
|
|
| |
|
| 
(Videos
will open in Windows Media
Player)
|
| The
Shot Pot with Timer Hot Melt
system is a bench mounted industrial
hot melt extrusion system. It
precisely applies hot melt adhesive
in dot or bead form at low pressure.
It operates easily with a wide
range of low to medium viscosity
hot melt adhesives.
Actuation of
the foot switch triggers a
solenoid in the unit that
initiates a timing sequence
that cycles a fluid valve
or module. Pressurized adhesive
from the melt tank quickly
flows past this valve into
a nozzle tip and onto your
substrate. The cycle time
is adjustable to insure exact
pattern repeatability or this
feature can be deactivated
so adhesive cycles only when
the foot switch is depressed.
Following are
specifics of the Shot Pot
with Timer:
- Complete
"Turn-Key" bench top hot
melt extrusion system
- Foot
switch with cable to unit
to actuate adhesive flow
- 3.5
lb. hot melt tank capacity,
Teflon lined
- 3
to 5 lb. per hour melt rate
depending on adhesive
- Removable
melt grid in bottom of tank
- Thermostatically
adjustable temperature controller
in centigrade, 50 to 200
C
- Pneumatically
adjustable adhesive flow
control
- High
Speed valve/module for excellent
adhesive shut off
- Adjustable
timer from .25 to 9 seconds
for pre-measured adhesive
patterns
- Three
nozzles and one extra tank
seal included with purchase
- Typical
Adhesive viscosities range
between 500 and 5000 cps
- Typical
hot melts used with system
are EVA's, APAO's, Polyamides,
pressure sensitive and fugitive
hot melts
- Power
requirements are 120 VAC,
800 Watts
- Dimensions
are 18" high x 15" wide
x 13.5" deep
- Weight
is 32.5 lbs.
- Compressed
air required: 30-90psi
- Six
month warranty against defective
workmanship
- Method
of shipment is UPS
|
 |
OPTIONAL
Auto Trigger Sensor Package
Click
for Details |
|
|
For
more information, please contact:
Glue Machinery Corporation™
4234 Boston St.
Baltimore, Maryland 21224
Toll Free: 1-888-202-2468
Phone: 410-761-2727
Fax: 410-761-5127
Email: info@gluemachinery.com
Visit us online at www.GlueMachinery.com
<---------------------
|
