Champ™ 10S LCD Hot Spray Gun1
Champ™ 10S LCD Hot Spray Gun2
Champ™ 10S LCD Hot Spray Gun3
Champ™ 10S LCD Hot Spray Gun4
Champ™ 10S LCD Hot Spray Gun5
Champ™ 10S LCD Hot Spray Gun6
Champ™ 10S LCD Hot Spray Gun7
Champ™ 10S LCD Hot Spray Gun8
Champ™ 10S LCD Hot Spray Gun9
Champ™ 10S LCD Hot Spray Gun10
Champ™ 10S LCD Hot Spray Gun11
Champ™ 10S LCD Hot Spray GunChamp Pneumatic Hot Melt Gun on Custom Stand with footswitch12
Champ™ 10S LCD Hot Spray Gun13
Champ™ 10S LCD Hot Spray Gun14
Champ™ 10S LCD Hot Spray Gun15

Compatible With:

  • Hot Melt Adhesives in Bulk Chip form: Permanent, Removable, Packaging and others. (Quality Bulk Adhesives available for use with Champ™ 10S Hot Spray Gun from Glue Machinery Corporation).
  • Champ Boom Package

Product Manuals / Related PDFs:

Programming the Temperature Readout Example Estimate

Warning:

Melt-Fill Tank

Melt-Fill Tank

Supplemental Melter for Hot Melt Handguns with Reservoirs.

champsump

Champ™ Sump 128

Melter with pump for fast hot melt filling of the Champ™ 10 & 10s.

** Read Manual Before Operating Any Champ Adhesive Applicator**
Always Wear Protective Gloves, Sleeves and Safety Glasses When Operating Champ Adhesive Applicators
** Champ Adhesive Applicators And Adhesives Are Very Hot; Injury Could Result From Improper Use**

Champ™ 10S LCD Hot Spray Gun

Industrial Hot Melt Fiber Spray Handgun with heated melt tank reservoir in the gun allows for the precise application of low viscosity hot melt adhesives down onto substrates. Can also be used to extrude dots of lines of hot melt adhesive.

$

Product Details:

Browse Champ 10s Nozzles and Spare Parts

  • This gun comes standard with nozzle # G05E01-021
  • 8.5 ounce melt tank capacity
  • Adjustable temperature, volume & spray controls
  • Process hot melt 1.5" in diameter or smaller
  • Adapter and multi-orifice nozzles available
  • 120 volt
  • 120VAC 600W, supplied with  NEMA 5-15 Style plug, maximum of  3.5  SCFM at 80PSI, supplied with a ¼ industrial coupling.(Customer to contact industrial supplier of compressors for correct air compressor size recommendation)
  • Champ 10s LCD/WAX Power Requirements: 120VAC=5 amp/1ph/50-60Hz- 240VAC=2.5 amp/1ph/50-60Hz.
  • Requires compressed air
  • Applies down onto substrates only
  • M14 x 1 Nozzle Threads
  • Optional swirl nozzle/cap available
  • The umbilical cable back to the gun deck with air regulators  that houses the air line and power cord is 15’. The power cord from the gun deck  of the umbilical cord is 12’
  • Bulk Fill Options Available
The Champ™ 10s Hot Spray Gun is a totally self-contained hot melt spray system. The heated chamber melts adhesive within the gun and requires no heated hoses or tank. The Champ™ 10s Hot Spray Gun works with pressure sensitives, fugitives & standard packaging hot melts of medium and low viscosities without solvents. (Adhesives can be purchased in bulk form from Glue Machinery Corporation™)

QUOTE THIS MACHINERY

Champ™ 10S LCD Hot Spray Gun

Call 1-410-761-2727Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.