DM5 Hot Melt Pail Unloader1
DM5 Hot Melt Pail UnloaderComponents2
DM5 Hot Melt Pail UnloaderSpecifications3
DM5 Hot Melt Pail UnloaderControl Panel Specifications4
DM5 Hot Melt Pail UnloaderPanel Box 5
DM5 Hot Melt Pail UnloaderPanel Box 6
DM5 Hot Melt Pail Unloader7
DM5 Hot Melt Pail Unloader8
DM5 Hot Melt Pail Unloader9
DM5 Hot Melt Pail Unloader10
DM5 Hot Melt Pail UnloaderHigh flow hot melt ball valve 11
DM5 Hot Melt Pail UnloaderHigh flow hot melt ball valve 12

DM5 Hot Melt Pail Unloader

The DM5 is a stationary Pail Melter (unloader) that combines a heated platen, pump and all controls needed to melt and dispense hot melt adhesives, sealants, PURs or coatings from a standard 5-gallon steel pail. The controller provides accurate, proportionate temperature control for the platen, hoses and applicators. A “standby” temperature may be programmed so that the temperature zones can be independently maintained at a lower temperature when the unit is not in active use, enabling rapid return to normal operation. A variety of gear pumps are available. The Melter can be utilized as a bulk-transfer unit or as a stand-alone unit. It can supply one or two hand-held applicators or other applicators.

$

Product Details:

  • Special melt platen grid  designs provide excellent melt rate into precision gear pump
  • Small footprint provides ease of installation.
  • Removable  platen face allowing for easy cleaning and replacement where necessary
System DM5
Operating temperature range  100°F to 450°F (40°C to 232°C)
Melt rate* up to 30lbs/h (14kg/h) *
Gear pump sizes 0.55 ccm - 10 ccm
Pail Size 5 gallon (19I) steel pail US Standard
Pail Inner Diameter 11.25 in (30 cm)
Hose/Head output zones 2/2
Aux output zones 2
Supply voltage setup 1 240 VAC Delta, 480 VAC Delta
Supply voltage setup 2 380 VAC WYE Volts
Total Amp draw 6.7kW
Height 64.9in (165cm)
Depth 25.6 in (65cm)
Width 45.0in (114.3cm)
* Melt rates vary with adhesive type Available Options
  • Digital Pressure Transducer Kit
  • Platen Circulation
  • Swirl Kit, Dual, 240V
  • Vent hood for PUR adhesive applications
  • Finned, High Flow, Standard Air Inject
  • Smooth Platen, Standard Air Inject

QUOTE THIS ITEM

DM5 Hot Melt Pail Unloader

Call 1-888-202-2468Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.