Box Erector Gluer1
Box Erector Gluer2
Box Erector Gluer3
Box Erector Gluer4
Box Erector GluerChamp 5 with Tool Balancer and Mandrill5
Box Erector Gluer6
Box Erector Gluer7
Box Erector Gluer8

Compatible With:

Small to large corrugated boxes.

Product Manuals / Related PDFs:

Ergo Erector™ product manual is available from Glue Machinery Corporation - 1-888-202-2468

Box Erector Gluer

Complete high volume ergonomic manual box bottom erector with hot melt system.


Product Details:

This simplified box erecting improves package quality, accelerates the box building process and reduces adhesive consumption by as much as 50% The operator easily square boxes by sliding them over the mandrel, fold in the minor flaps and apply the hot melt adhesive to the minor flaps, then compress the major flaps against the mandrel and seal the case bottom permanently. The mandrel system insures that the minor flaps do not deflect away from the major flaps when compressed and the maximum bond is achieved immediately. The complete box erector system includes a steel workstation base, adjustable height mandrel, mandrel specific to your box or boxes, high volume hot melt tank, hose and gun, welded steel hot melt tank stand, and adjustable boom, hose cradle, and tool balancer. Assembly is very easy, typically taking one hour.
  • 1x 200 lb. 48" x 48" 5/16" Steel Workstation Base with floor mounting holes for three mandrel positions, boom base and tank stand.
  • 1x  Mandrel with vertical post adjustment height from 29" to 47"
  • 1x Boom and Tank Stand
  • 1x 8' 8" tall vertical post with 38" horizontal boom
  • 1x Slide in horizontal portion of boom
  • 1x Adjustable Tool Balancer
  • 1x Hot Melt Hose Cradle
  • 1x Industrial Hot Melt Tank, 10 lb Capacity, 120 or 240 VAC
  • 1x 8' Heated Flexible Hose
  • 1x Top Feed Hot Melt Handgun with Ball Swivel Connector
  • 1x 0.55" Orifice Nozzle Tip
  • 1x 50 lbs. GIA1041 Fast Setting Hot Melt Adhesive
Delivery is 2-3 weeks.


Box Erector Gluer

Call 1-410-761-2727Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.