Pneumatic Level Control1
Pneumatic Level ControlHot Melt Hose2
Pneumatic Level ControlHot Melt Hose3

Compatible With:

Hot Coat and Hot Coat Plus 11, 15, 23, 31, 39, Roller Gluer. Inquire about your specific needs.

Product Manuals / Related PDFs:

Pneumatic Level Control Product Manual is available from Glue Machinery Corporation - 1-888-202-2468

Pneumatic Level Control


Product Details:

The pneumatic level control is used to detect adhesive level in reservoir and to provide a signal to operate the fill pump and maintain a constant level in reservoir (+/- 1/8"). The control utilizes an aluminum tube inserted into the reservoir at the desired fill level of the adhesive.  The control detects the level pneumatically and incorporates a high level failsafe feature to ensure against overfilling of the reservoir. The control also includes a timing relay to cancel out intermittent or false trigger signals and can be used to allow a greater drop in level until refilling occurs. The output of the level controller can be configured to generate a voltage output to operate a solenoid, or a dry isolated contact output to interface to a pump control circuit.
  • Electrical Requirements: 120 VAC 2A
  • Pneumatic Requirements: 20 psi clean, dry air, less than 1 scfm.
  • Physical Size (Control Box): 8" x 12" x 6"


Pneumatic Level Control

Call 1-410-761-2727Or Fill Out The Form Below
  • This field is for validation purposes and should be left unchanged.