Shot Pot™ Fill - Hot Melt Handgun Adhesive Refill System

Product Details:

• Complete Bench top hotmelt system for filling Champ™ hot melt guns.
• Foot switch with cable to unit to actuate adhesive flow.
• 3.5 lb. capacity teflon lined tank.
• 3 to 5 lb. per hour melt rate depending on adhesive.
• Removable melt grid in bottom of tank.
• Adjustable thermostat temperature controller, 50º to 300ºC.
• Pneumatically adjustable adhesive flow control.
• Check valve subassembly for good adhesive shut off.
• Three nozzles and one extra tank seal included with purchase.
• Typical adhesive viscosities range between 500 and 5000 cps.
• Typical hot metls used with this sytem are EVA's, APAO's, Polyamides, pressure sensitive and fugitive hot melts.
• Power requirements are 120VAC or 240VAC, 1500 W
• Dimensions are 17" H x 15" W x 16" Deep.
• Weight is 29 lbs.
• Shot Pot Adapter Threads are 1/4BSPP.
• Compressed air required: 30-90 psi.
• Six month warranty against defective workmanship.
• Method of shipment is UPS.