|
|
|
- GIA1102 Pressure Sensitive Adhesive
Description: A resin based adhesive that dries into a pressure sensitive film. Will stick to many films and foils and has excellent machining properties.
Product Details:
-Acrylic Base
-Excellent Aging Characteristics
Type: Synthetic Resin
Viscosity: 6500 cps ± 2500
Solids: 69% ± 2.5
pH: 5.0
Color: white / clear when dry.
Lbs. Per Gallon: 8.4
Shelf Life: 3 Months
Downloads: Specs | MSDS
(Contact Glue Machinery Corporation - 1-888-202-2468)
- G20A78 Water Based Cold Glue Adhesive
Description: Water based adhesive for paper substrates.
Compatible with: Paper substrates of all types.
Product Details: Applies in thin coating and immediately offers tack between paper substrates. Quickly dries to form a permanent bond.
- GCA1001 - Fugitive Removable Water Based Adhesive
Description: Fugitive/temporary adhesive that is designed to hold paper together without any fiber-tear. Provides ultra low tack on various substrates.
Compatible with: Excellent for padding of memos or applications requiring removability and repositionability including stick-on labels.
Used in business forms, labeling of magazines, coupons, peelable flaps, glue tacks, stickers & stamps.
Product Details:
Appearance: White liquid, dries milky.
Viscosity: 200-700 cps (brookfield, 20 rpm, #2 spindle, 77ºF)
Weight/Gallon (lbs): 8.4
Solids: 29 ± 3%
pH: 9.0 - 9.9
Shelf Life: Six months in closed container.
Clean-up: Warm, soapy water while still wet; final clean up with solvent. (E.g. Acetone, Ethylacetate, Isopropanol).
Storage Conditions: Store below 90ºF. Keep from freezing and excessing heat/cold. If very cold, product should be warmed slowly. Low temperatures will thicken product; High temperature will thin product. If frozen, product is unusable.
The information here is believed to be accurate but is not warranted to be so. Protective equipment, health effects, and other related safety measures are based on intended and anticipated product use. Recipients are advised to confirm in advance of need that the information is applicable and suitable to their circumstances.
- GIA1114 Water Based Adhesive
Description: GIA1114 is a palletizing water based adhesive formulated to secure cases for pallet stabilization and exhibiting easy removability.
Product Details:
Viscosity: 1,800 + 250 cps @ 75ºF
Type: Modified Synthetic Resin
Color: White
Shelf Life: 3 Months
Downloads:  Specs | MSDS
- GIA1084 Aqueous Water Based Adhesive
Description: GIA1084 is a versatile water based adhesive exhibiting fast tack and good machining. GIA1084 exhibits some water resistance properties with submersion tests. An excellent adhesive for joint and glue laps and certain carton applications.
Product Details:
Viscosity: 1400 cps ± 250 @ 75ºF
Type: Modified water base synthetic polymer.
Color: White, clear when dry.
pH: 5.0 ± 1.0
Shelf Life: 3 months.
Solids: 56.0% ± 2.5
Downloads: Specs | MSDS
(Contact Glue Machinery Corporation - 1-888-202-2468)
- GIA1095 Water Based Glue Adhesive
Description: Synthetic resin adhesive developed for flush door construction. It was designed to give strong, permanent bonds on typical door components such as Masonite, wood, MDF, corrugated cardboard, particle board, mineral-based fire insultation, etc.
Compatible with: GIA1095 meets or exceeds the requirements as set out in the NWWDA I.S. 1 6-87 for a Type 1 wood or flush door adhesive. It has been tested and approved on both the George Pacific and Weyerhaeuser fire door constructions. Approved for use in the assembly of 20, 45, 60, and 90 minute fire doors, with or without plastic laminate faces.
Application: Applied by mechanical roller at a rate of 9-14 mils wet film thickness. GIA1095 can be used to assemble a wide variety of hollow and solid core flush doors. Minimum aplpication temperature is 13ºC.
Assembly Time: Typical assembly time is approximately 10-25 minutes (up to 30 minutes). The assembled doors should then be placed in press for 30 minutes for proper bond development.
GIA1095 can also be successfully used on hot presses. Note that when assembling a mult-layer door construction, the surfaces must be sufficiently cooled after each press cycle. This will avoid premature drying of the adhesive film before completing assembly.
Depending on the construction and types of components used, trimming can be performed as early as 2 1/2 hours after removal from the press. Ideally, the delay period before trimming should be extended as long as convenient to enable the GIA1095 to develop as thorough a bond as possible.
Product Details:
Specific Gravity: 1.06
Viscosity: 9,600 ± 900 cps (5/20 rpm/25ºC)
Type: Modified water base synthetic polymer.
pH: 4.0 - 6.0
Shelf Life: 3 months in the original unopened container when stored in a cool, dry area. Protect from freezing.
Solids: 47 ± 2.5%
Downloads: Specs | MSDS
(Contact Glue Machinery Corporation - 1-888-202-2468)
- GIA1090 Water Based Glue Adhesive
Description: A water based resin adhesive exhibiting aggressive tack and deep adhesion on paper and paperboard. GIA1090 is formulated as a tube winding adhesive.
Product Details:
Viscosity: 2,000 cps ± 400
Type: Modified polyvinyl acetate
pH: 4.0 ± 1.0
Shelf Life: 3 Months
Solids: 30.0% ± 2.5
Downloads: Specs | MSDS
(Contact Glue Machinery Corporation - 1-888-202-2468)
|
