EconoMelt™ 10 Hot Melt Handgun Swirl Distillate System
$QUOTE THIS MACHINERY
EconoMelt™ 10 Hot Spray Distillate System
Call 1-410-761-2727Or Fill Out The Form Below
Product Details:
- 120 V OR 240 V ( Must be specified by customer)
- 10 lb tank capacity
- 7 to 15 lb / hour melting rate depending on system voltage and adhesive
- Air powered piston pump
- Max viscosity: 12,000 CPS
- Max Operation Temp: 220ºC/428ºF
- Dimensions: 16.93" x 13.39" x 28.74"
- 10 lbs per hour in 120 VAC and 15 lbs per hour in 240 VAC
- Operates with one 6, 8 or 12’ hose 120 or 240 V
- Power Requirements: 120VAC= 16.6 amp/1ph/50-60Hz. 240VAC=8.33 amp/1ph/50-60Hz
- Also available as a Extrusion System only to apply beads of hot melt
- Maximum pump air consumption at 60PSI 1.4 SCFM (30 pump cycles per minute)
- The EconoMelt™ 10 utilizes analog temperature controllers and type k thermocouples. These analog temperature controllers are factory preset and calibrated to the thermocouple. These do not require re-calibration.